vmware-aria（VMware 咏叹调）

VMware Aria Operations

Disclaimer: This is a community-maintained open-source project and is not affiliated with, endorsed by, or sponsored by VMware, Inc. or Broadcom Inc. "VMware" and "Aria" are trademarks of Broadcom. Source code is publicly auditable at github.com/zw008/VMware-Aria under the MIT license.

VMware Aria Operations (vRealize Operations) AI-assisted monitoring — 27 MCP tools for resources, alerts, alert definitions, capacity planning, anomaly detection, report automation, and platform health.

Domain-focused monitoring skill for Aria Operations 8.x / vRealize Operations 8.x. Companion skills: vmware-nsx (networking), vmware-aiops (VM lifecycle), vmware-monitor (read-only vSphere), vmware-avi (AVI/ALB/AKO). | vmware-pilot (workflow orchestration) | vmware-policy (audit/policy)

What This Skill Does

Total: 27 tools (23 read-only + 4 write)

Quick Install

uv tool install vmware-aria
vmware-aria doctor

When to Use This Skill

Performance monitoring (daily proactive checks):

• Check VM contention: CPU Ready %, Memory Balloon, Swap usage
• Fetch time-series metrics for any resource (CPU, memory, disk, network)
• Find top consumers by CPU/memory/disk/network
• Detect ML-based anomalies and risk scores

Alert management:

• List, investigate, acknowledge, or cancel active alerts
• List or filter alert definitions (templates)
• Create new alert definitions from symptom definitions (post-RCA)
• Enable or disable alert definitions; delete obsolete ones

Capacity planning:

• Cluster capacity remaining (CPU, memory, disk headroom)
• Time-until-full prediction per cluster
• Right-sizing: find over-provisioned or under-utilized VMs
• Capacity overview with Aria's built-in recommendations

Report automation:

• Generate scheduled or on-demand reports (capacity, performance, SLA)
• Poll report status until COMPLETED; get PDF/CSV download URL
• Delete generated reports after download

Use companion skills for:

• VM lifecycle: create, clone, snapshot, power → vmware-aiops
• NSX networking: segments, gateways, NAT, routing → vmware-nsx
• vSphere inventory, real-time alarms, events → vmware-monitor
• Storage: iSCSI, vSAN, datastores → vmware-storage
• Load balancing, AVI/ALB, AKO, Ingress → vmware-avi

Related Skills — Skill Routing

Common Workflows

Diagnostic investigations: Before running any "why is X slow / failing / down" workflow, follow references/investigation-protocol.md. It enforces the four root-cause completeness criteria (falsifiability / sufficiency / necessity / mechanism) and the up-to-three-rounds deepening loop. Stopping at a partial conclusion is an anti-pattern — always self-check against the criteria before outputting a report.

Daily VM Health Check (Proactive Ops)

Judgment: don't chase the highest CPU consumer — chase the highest contention consumer. A VM at 90% CPU on a quiet host is healthy; a VM at 30% CPU but 15% Ready is starving. Key metrics: CPU Ready, Memory Balloon, Disk Latency.

1. Find top CPU consumers → vmware-aria resource top --metric cpu|usage_average --top 20 (this is the starting set, not the answer)
2. Check CPU Ready on hot VMs → vmware-aria resource metrics <vm-id> --metrics cpu.ready.summation --hours 24

- >5% = warning, >10% = problem, >20% = critical

1. Check memory pressure → vmware-aria resource metrics <vm-id> --metrics mem.balloon.average,mem.swapped.average --hours 24

- Balloon >0 = ESXi reclaiming memory; Swap >0 = severe — act immediately

1. List active CRITICAL/IMMEDIATE alerts → vmware-aria alert list --criticality CRITICAL
2. Check ML anomalies → vmware-aria anomaly list
3. Cross-validate against the investigation protocol before reporting any "root cause" — high consumption is rarely the root, usually a downstream symptom

Investigate High CPU Alert

1. List active CRITICAL alerts → vmware-aria alert list --criticality CRITICAL
2. Get alert details + symptoms → vmware-aria alert get <alert-id>
3. Find top CPU consumers → vmware-aria resource top --metric cpu|usage_average
4. Fetch 24h CPU metrics for the hot VM → vmware-aria resource metrics <vm-id> --metrics cpu|usage_average --hours 24
5. Check risk badge → vmware-aria anomaly risk <vm-id>
6. Acknowledge the alert → vmware-aria alert acknowledge <alert-id>

Capacity Planning

1. List clusters → vmware-aria resource list --kind ClusterComputeResource
2. Get remaining capacity → vmware-aria capacity remaining <cluster-id>
3. Predict time until full → vmware-aria capacity time-remaining <cluster-id>
4. Get capacity overview with recommendations → vmware-aria capacity overview <cluster-id>
5. Find rightsizing candidates → vmware-aria capacity rightsizing

Post-Incident: Create Detection Alert (RCA Follow-up)

After resolving an incident, create an early-warning alert to prevent recurrence:

1. Find matching symptom definition → vmware-aria alert symptom-definitions --name <keyword>
2. Create alert definition referencing symptoms → vmware-aria alertdef create --name "Gold VM CPU Contention" --resource-kind VirtualMachine --symptom-ids <id1>,<id2> --criticality IMMEDIATE
3. Verify it appears in definitions → vmware-aria alertdef list --name "Gold VM CPU"
4. Enable it → vmware-aria alertdef enable <definition-id>

Generate Capacity Report

1. Find report template → vmware-aria report definitions --name "Capacity"
2. Trigger report generation → vmware-aria report generate <definition-id>
3. Poll until completed → vmware-aria report get <report-id> (repeat until status == COMPLETED)
4. Download via the returned download_url (PDF) or csv_url
5. Clean up → vmware-aria report delete <report-id>

Multi-Target Operations

All commands accept --target <name> to operate against a specific Aria Ops instance:

vmware-aria alert list --target prod
vmware-aria resource top --target lab

Usage Mode

MCP Tools (27 — 21 read, 6 write)

All MCP tools accept an optional target parameter to select which Aria Operations instance to connect to.

Read/write split: 21 read-only, 6 write. All write operations are audit-logged to ~/.vmware/audit.db (via vmware-policy).

CLI Quick Reference

# Resources
vmware-aria resource list [--kind VirtualMachine|HostSystem|ClusterComputeResource] [--name <filter>]
vmware-aria resource get <resource-id>
vmware-aria resource metrics <resource-id> --metrics cpu|usage_average,mem|usage_average --hours 4
vmware-aria resource metrics <vm-id> --metrics cpu.ready.summation,mem.balloon.average --hours 24
vmware-aria resource health <resource-id>
vmware-aria resource top --metric cpu|usage_average --kind VirtualMachine --top 10

# Alerts
vmware-aria alert list [--criticality CRITICAL|IMMEDIATE|WARNING|INFORMATION]
vmware-aria alert get <alert-id>
vmware-aria alert acknowledge <alert-id>
vmware-aria alert cancel <alert-id>
vmware-aria alert definitions [--name <filter>]

# Alert Definitions (create/manage alert templates)
vmware-aria alertdef symptom-definitions [--name <filter>] [--resource-kind VirtualMachine]
vmware-aria alertdef create --name <name> --description <desc> --resource-kind <kind> --symptom-ids <id1,id2> --criticality WARNING|IMMEDIATE|CRITICAL
vmware-aria alertdef list [--name <filter>]
vmware-aria alertdef enable <definition-id>
vmware-aria alertdef disable <definition-id>
vmware-aria alertdef delete <definition-id>

# Capacity
vmware-aria capacity overview <cluster-id>
vmware-aria capacity remaining <resource-id>
vmware-aria capacity time-remaining <resource-id>
vmware-aria capacity rightsizing [--resource-id <vm-id>]

# Reports (async: generate → poll get → download → delete)
vmware-aria report definitions [--name <filter>]
vmware-aria report generate <definition-id> [--resource-ids <id1,id2>]
vmware-aria report list [--definition-id <id>]
vmware-aria report get <report-id>        # poll until status == COMPLETED; shows download_url
vmware-aria report delete <report-id>

# Anomaly
vmware-aria anomaly list [--resource-id <id>]
vmware-aria anomaly risk <resource-id>

# Health
vmware-aria health status
vmware-aria health collectors

# Diagnostics
vmware-aria doctor [--skip-auth]

Key Metric Names (for resource metrics command)

Full CLI reference with all options and output formats: see references/cli-reference.md

Troubleshooting

"Token not found" error after setup

The token acquisition request failed. Verify:

1. Aria Ops is reachable: vmware-aria doctor
2. The auth_source in config matches your environment (LOCAL, LDAP, AD)
3. The password env var follows the naming convention: VMWARE_ARIA_<TARGET>_PASSWORD

Resources appear missing from list_resources

The collector agent may be offline. Check list_collector_groups for any collectors in a non-RUNNING state. Restart the affected collector from the Aria Ops UI under Administration > Collector Groups.

Metrics return empty data

The resource may not have metric collection configured, or the requested metric key is incorrect. Verify metric keys against the resource's available metrics in the Aria Ops UI (Metrics tab on the resource detail page).

"Password not found" error

Variable names follow the pattern VMWARE_ARIA_<TARGET_NAME_UPPER>_PASSWORD where hyphens become underscores. Example: target prod needs VMWARE_ARIA_PROD_PASSWORD. Check your ~/.vmware-aria/.env file.

invalid peer certificate: UnknownIssuer when running uvx (corporate TLS proxy)

uvx re-resolves dependencies from PyPI on every launch. Behind a corporate TLS-intercepting proxy whose CA is not in uv's bundled cert store, the handshake fails. Use the v1.5.15+ recommended single-command form vmware-aria mcp (after uv tool install vmware-aria — no network on launch), or set UV_NATIVE_TLS=true to make uv use the system cert store.

Safety

• Read-heavy: 21 of 27 tools are read-only
• Audit logging: Write operations logged to ~/.vmware/audit.db (SQLite WAL, via vmware-policy) with timestamp, user, target, operation, and result
• Token expiry handling: OpsToken refreshed automatically 60 seconds before expiry (30-minute validity window)
• Prompt injection defense: API text values sanitized via _sanitize() — strips control characters, truncates to 500 chars
• Credential safety: Passwords loaded only from environment variables (.env file), never from config.yaml
• Input validation: resource_id and alert_id validated before API calls; criticality values validated against known enum

Setup

uv tool install vmware-aria
mkdir -p ~/.vmware-aria
cp config.example.yaml ~/.vmware-aria/config.yaml
# Edit config.yaml with your Aria Operations host details

# Add to ~/.vmware-aria/.env (create if missing, chmod 600):
# VMWARE_ARIA_PROD_PASSWORD=<your-password>
chmod 600 ~/.vmware-aria/.env

vmware-aria doctor

All tools are automatically audited via vmware-policy. Audit logs: vmware-audit log --last 20

Full setup guide with multi-target config, MCP server setup, and Docker: see references/setup-guide.md

Architecture

User (natural language)
  |
AI Agent (Claude Code / Goose / Cursor)
  | reads SKILL.md
vmware-aria CLI or MCP server (stdio transport)
  | Aria Operations Suite API (REST/JSON over HTTPS)
  | POST /suite-api/api/auth/token/acquire → OpsToken
Aria Operations Manager
  |
VMs / Hosts / Clusters / Datastores / Alerts / Capacity

The MCP server uses stdio transport (local only, no network listener). Connections to Aria Ops use HTTPS on port 443 with OpsToken authentication (30-minute token validity, auto-refreshed).

Audit & Safety

All operations are automatically audited via vmware-policy (@vmware_tool decorator):

• Every tool call logged to ~/.vmware/audit.db (SQLite, framework-agnostic)
• Policy rules enforced via ~/.vmware/rules.yaml (deny rules, maintenance windows, risk levels)
• Risk classification: each tool tagged as low/medium/high/critical
• View recent operations: vmware-audit log --last 20
• View denied operations: vmware-audit log --status denied

vmware-policy is automatically installed as a dependency — no manual setup needed.

License

MIT — github.com/zw008/VMware-Aria