bambu-local（本地竹子）

Bambu Local - 3D Printer Control

Control Bambu Lab printers locally via MQTT without cloud dependency.

Setup

1. Create virtual environment:

python3 -m venv ~/bambu-env
source ~/bambu-env/bin/activate
pip install paho-mqtt

1. Create config.json in skill folder:

{
  "printer_ip": "192.168.x.x",
  "access_code": "xxxxxxxx",
  "serial": "xxxxxxxxxxxx",
  "printer_name": "MyPrinter"
}

Get these from your printer: Settings → LAN Only Mode (access code) and Settings → Device (serial).

Commands

Status

run ~/thinkfleet/skills/bambu-local/bambu status

Light

run ~/thinkfleet/skills/bambu-local/bambu light on
run ~/thinkfleet/skills/bambu-local/bambu light off

Print Control

run ~/thinkfleet/skills/bambu-local/bambu print pause
run ~/thinkfleet/skills/bambu-local/bambu print resume
run ~/thinkfleet/skills/bambu-local/bambu print stop

Speed (1=Silent, 2=Standard, 3=Sport, 4=Ludicrous)

run ~/thinkfleet/skills/bambu-local/bambu speed 2

Temperature

run ~/thinkfleet/skills/bambu-local/bambu temp --bed 60
run ~/thinkfleet/skills/bambu-local/bambu temp --nozzle 200

G-code

run ~/thinkfleet/skills/bambu-local/bambu gcode "G28"

Supported Printers

• Bambu Lab A1 / A1 Mini
• Bambu Lab P1P / P1S
• Bambu Lab X1 / X1C