- name
- netatmo
- description
- Control Netatmo thermostat and read weather station data. Use for heating control (set temperature, change mode), checking indoor/outdoor temperatures, CO₂ levels, humidity, noise, and pressure readings.
Netatmo
Control Netatmo smart home devices via netatmo CLI.
Setup
Credentials in ~/.config/netatmo/:
credentials.json:{"client_id": "...", "client_secret": "..."}tokens.json: OAuth tokens (auto-refreshed)
Commands
netatmo status # Full overview (thermostat + all sensors)
netatmo thermostat # Thermostat details only
netatmo weather # All sensors including Office
netatmo history # 7-day temperature history with sparklines
netatmo history --days 14 # Custom period
netatmo set 21 # Set target temp (7-30°C, 3h manual mode)
netatmo mode schedule # Resume schedule
netatmo mode away # Away mode (12°C)
netatmo mode hg # Frost guard (7°C)
netatmo <cmd> --json # JSON output for any commandAvailable Data
| Location | Temp | Humidity | CO₂ | Noise | Pressure | Battery |
|---|---|---|---|---|---|---|
| Bedroom (main) | ✓ | ✓ | ✓ | ✓ | ✓ | — |
| Outdoor | ✓ | ✓ | — | — | ✓* | ✓ |
| Living Room | ✓ | ✓ | ✓ | — | — | ✓ |
| Office | ✓ | — | — | — | — | — |
*Pressure displayed with Outdoor (sensor in main station)
Notes
- CO₂ >1000 ppm = poor ventilation
setuses manual mode for 3h, then reverts to schedule- Tokens auto-refresh on expiry
- History shows ASCII sparklines for temperature trends